Walk-away Lock and Approach Unlock 2022+

Walk‑away Lock and Approach Unlock 2022+ — PEPS Passive Entry CCF Activation

Walk‑away Lock and Approach Unlock 2022+ unlocks factory passive entry‑exit logic for 2022‑plus Range Rover L460 and Range Rover Sport L461 DOIP platforms. In fact, many vehicles ship with complete KVM, LF‑antenna and passive‑entry hardware pre‑fitted. Furthermore, the function remains disabled inside the vehicle Car‑Configuration‑File (CCF). Our remote VIN‑based coding enables this built‑in PEPS logic without module swap‑outs or wiring changes.

Stock non‑coded units require manual key‑fob button presses to lock or unlock doors. However, after our CCF activation, proximity‑based triggering becomes active. In addition, end‑users can toggle the feature directly inside the Pivi Pro safety‑security menu. The system uses existing KVM low‑frequency antenna zones for fob authentication. If you need OEM service reference documents for these chassis, view our JLR Membership 3‑Month subscription.

Core Technical Functions Enabled by Walk‑away Lock and Approach Unlock 2022+

• Approach Unlock: First, KVM detects valid smart‑fob within ~1.5‑metre proximity zone. Next, the system disarms the alarm, unfolds mirrors and readies door‑entry once you approach the vehicle.
• Walk‑Away Lock: Once all doors close and the fob moves outside ~2.5‑metre detection range, BCM triggers central locking. Besides that, mirrors fold and the factory alarm arms automatically.
• Pivi Pro User Toggle: Enable or disable both functions from the in‑car infotainment safety‑security menu without diagnostic equipment.
• Confirmation Feedback: It supports visual hazard‑lamp flash. Audible chirp confirmation works if the vehicle’s warning‑tone hardware is present.
• PEPS safety safeguards: Importantly, system ignores key‑fobs detected physically inside the cabin to prevent accidental locking of smart‑keys inside vehicle.
• Software‑only modification: This service edits CCF configuration parameters. It will not rewrite KVM firmware or alter immobiliser security calibration.

Vehicle Eligibility & Hardware Pre‑Conditions

This activation applies exclusively to 2022+ Range Rover L460 and Range Rover Sport L461 DOIP chassis. Meanwhile, the vehicle must already contain full passive‑entry hardware: compatible KVM module, door‑handle capacitive sensors and low‑frequency exterior antennas. Without these factory‑fitted components, this CCF change alone cannot deliver working passive functions. Moreover, Pivi Pro infotainment must run up‑to‑date compatible OEM firmware. For official OEM background on modern JLR PEPS systems, visit the official Jaguar Land Rover global website.

Who Should Purchase Walk‑away Lock and Approach Unlock 2022+

This remote coding service fits JLR retrofit specialists and owners of L460 / L461 vehicles with pre‑installed passive‑entry hardware. It adds premium convenience features without expensive dealer option upgrades. Lastly, it suits workshops completing Pivi‑Pro‑based comfort‑feature retrofits. Please note, this is VIN‑locked remote software‑activation service only. It does not supply physical parts or on‑site vehicle programming. For extra JLR comfort‑feature activations, browse our JLR Feature Activations category page.

Activation & Service Terms

Submit your vehicle’s 17‑digit VIN right after checkout. On the other hand, we validate hardware prerequisites before processing CCF configuration changes. Final configuration files or step‑by‑step activation instructions get delivered via email. This is a permanent, vehicle‑specific VIN‑locked feature activation.